SuperTectum
Trans Primer
SuperTectum
Trans Primer
Trans Primer
One-component, non-staining primer for non-porous surfaces
One-component, colorless, non-staining primer specifically designed to provide adhesion of a transparent, waterproof coating SuperTectum Trans on non-porous surfaces.
Chemically, the material consists of a moisture-reacting organosilane and in a mixture of solvents and additives, to ensure overall surface wetting.
Application area
• Glossy cladding
• Porcelain cladding
• Marble, etc.
Features and benefits
- Quick drying
- No dilution is required
- Non-staining
- Easy application
Application procedure
1
Wash the surface with a high-pressure washer. Thoroughly clean the surface from dust, dirt, rust, oil products, cement mortar, plaster, paint, and other materials.
2
Shake well before use. Use with a cloth moistened with this material, without leaving a pool of liquid, thoroughly wiping the entire surface. Avoid contact with water. The maximum total flow rate is 50-80 ml/m2.
3
The material dries quickly and within 10-15 minutes the surface is ready for subsequent use of SuperTectum Trans.
General information
4 l
It can be stored for 12 months minimum in the original unopened containers in dry places at a temperature from 5° C to 25° C.
Contains volatile flammable solvents. Apply in well-ventilated areas, away from naked flames. NO SMOKING! Indoors, use ventilation and active carbon masks. The MSDS (Material Safety Data Sheet) is available on request.
Technical specifications
in liquid form:
Properties
Units
Method
Specification
Viscosity (BROOKFIELD)
cP
ASTM D2196-86 at 25°C
20 – 60
Specific weight
гр/см3
ASTM D1475 / DIN 53217 / ISO 2811 at 20°C
0.8 – 0.9
Flash point
°C
ASTM D93 closed cup
42
Dry time at 77° F (25° C) and 55% RH
min
-
15
Get TDS on this material
ANT ALLIANCE is an exclusive supplier of SUPERTECTUM products worldwide.